PRODUCTS » TECHNICAL SUPPORT » Data cabinets
Doors of wall mounted cabinet are full-glass as standard, but can also be solid metal or perforated on request.
Full-glass doors are made of tempered glass, which is impact resistant. It is soda-lime-silica safety glass with a thickness of 4 mm. If the door should happen to break, the safety glass breaks into a number of small fragments, the edges of which are generally blunt, similar to the side windows of cars.
The risk of injury is therefore minimal. For safety reasons, it is recommended that the full-glass door be closed after installation of the equipment in the enclosure to prevent collision with other objects. Our full-glass doors are tested in a certified testing laboratory and meet the requirements of ČSN EN 12150-1+A: Glass in construction – Thermally tempered soda-lime-silicate safety glass. The tested glass meets the standard for the disintegration of glass after breakage, Certificate of Conformity CQ-24- 2023, Test Protocol IKATES 58A-2024.
Doors of free-standing cabinet are metal with glued glass as standard, but can also be solid metal or perforated on request.
Metal door with glued glass are made using tempered glass, which is impact resistant. It is soda-lime-silica safety glass with a thickness of 4 mm. If the door should happen to break, the safety glass breaks into a number of small fragments, the edges of which are generally blunt, similar to the side windows of cars. The risk of injury is therefore minimal. For safety reasons, it is recommended that the full-glass door be closed
after installation of the equipment in the enclosure to prevent collision with other objects. Used glass is tested in a certified testing laboratory and meet the requirements of ČSN EN 12150-1+A: Glass in construction – Thermally tempered soda-lime-silicate safety glass. The tested glass meets the standard for the disintegration of glass after breakage, Certificate of Conformity CQ-24- 2023, Test Protocol IKATES 58A-2024.
OPTIONAL PACKAGING OF RMA CABINETS
All RMA cabinets 800 mm wide, 800 and 1000 mm deep, from 47 U height upwards, can be optionally delivered on a pallet in a horizontal position using RAX-TE-xxx-X1 pallets. These pallets must be ordered separately according to the cabinet type.
The cabinet is placed horizontally on a pallet, including a standard pallet for vertical packaging. The cabinet can thus be placed in a vertical position and easily handled (see technical data sheet).