RNA - hybrid cabinet
Data module of hybrid cabinets for home distribution systems IP20 / IK05
Information
Data module of hybrid cabinets for home distribution systems IP20 / IK05.
Cable entries on the top, bottom and both sides of the cabinet allow its mounting into larger assemblies with other cabinets of this series, including power distribution cabinets. The cabinet door is raised towards the front to ensure the required bending radius of the cables, including fibre cables. Perforation on the sides helps the cooling of installed active elements. The installation of equipment with self-tapping screws on the inner plastic plate is quick and easy. Cabinets are supplied in modular height, where one module occupies 166 mm. Power distribution cabinets of this series are also included in these modules. The width and depth of the cabinet is uniform for all heights. The cabinet is universal for mounting on the wall or under the wall plaster. A cover frame is available for wall mounting. Thanks to the modularity of the cabinet, it is possible to use, for example, a data part with a height of 2 modules and 1 electro module, all covered by a modular frame with a height of 3 modules.
Swing side panels
Side panels on both sides of the cabinet are folded for easy assembly of mounted components. All removable and rotating parts are connected according to the standard.
Data distribution
Keystone Standard modules are ready for the installation of data and communication distributions, into which any cables can easily fit.
Power supply
Door construction
The plastic door panel and the entire structure support the installation of Wi-Fi devices.
Flat door version cabinet
The RNA data cabinet with flat door (version -X2 at the end of the code) was developed for installation in places where it is not possible to benefit from the advantages of the standard model of this cabinet. The total depth of this modified cabinet, including the door, is only 110 mm. However, using a flat door brings some restrictions. The keystone holder for fitting data distributions is perpendicular to the plastic mounting plate, causing the cables to interfere more with the designated space for installing active elements. Additionally, the part designed for power supply distribution differs the basic model. Because of the space restriction, it is only possible to use sockets with the outside sizes 45 x 45 mm (so-called Legrand standard) without a cover frame and the sockets are mounted on a removable mounting panel. The possibility of using a 10“ power panel with the RNA-02 and RNA-03 types remained unchanged, as well as other properties of the standard version of the cabinet (mounting on/under the plaster, modularity etc.). The space for the installation of the cartridge for optical welds in the space behind the plastic mounting plate meets the requirements of the relevant standards for home installation.
Data distributions
To achieve any data cabling, optical or metallic, a swing bearing panel with holes according to the most widely used Keystone Standard is prepared in the cabinet. All moving or detachable parts of the cabinet are interconnected according to the standard.
Slide lock
The cabinet door is secured with a plastic slide lock, providing a secure closure to prevent spontaneous or accidental opening and allows easy operation of the installed equipment.
Power supply
For mounting of the 230 V power distribution, a separable panel is available in every cabinet. This separable panel is designed for the installation of classic sockets with a protective plastic box. For larger cabinets, a 10“ distribution panel can be installed. In the flat door version, it is only possible to use the so-called Legrand size sockets – with the front panel of 45 x 45 mm.
- IP20 / IK05.
- Cabinet is hung directly on the wall or can be installed in a prepared recess in the wall.
- Cabinet is designed for individual assembly or with cabinet SNA.
- Multigate (cable openings) on the top, bottom and both side panels of the cabinet alow joinning the cabinet into the larger sets with
other cabinets of this series including an electrical cabinets SNA type. - Cabinet construction:
– welded frame from 1 mm thick sheet steel combined with plastic PEHD 8 mm.
– frame door combined with steel of 1 mm thickness and plastic PP-H 1,5 mm. - The frame of the cabinet and all removable parts (side and rear covers, doors…) are bonded with patch cables that have to be properly fixed and inserted into connectors throughout the period of use of the cabinet.
- There is one M8 screw placed on the bottom part of the cabinet to connect the bonding.
- Cable openings covered with breakout-type blanking panels are placed in the top and the bottom of the cabinets, as well as on the sides.
- Maximum permissible load – cabinet: 20 kg; door: 2 kg.
Operating conditions
- Operating environment:
– houses, private residences,
– cabinets are not intended for outdoor installation or installation in environments which could adversely affect the functionality of the cabinet and the equipment installed in it (such as an environment where there is a danger of explosions or a damp or humid environment). - Must be protected against:
– physical damage,
– improper handling,
– other uses than the one it was intended for. - Improper handling means primarily:
– overloading (exceeding the maximum recommended load),
– installing equipment which could adversely affect the operation and functionality of the cabinet or other installed devices,
– interference with the construction or design of the cabinet.
Installation of the cabinet
This type of cabinet hangs directly on the wall, held in place by screws, anchors and washers. Can be also installed in a prepared recess in a wall using standard construction methods. To ensure the maximum recommended loading capacity, it is necessary to fix the cabinet securely to a wall of corresponding capacity (brick, concrete or similar) and to install all equipment inside in such a way as to evenly spread out the weight of the equipment.
Environmental protection
All parts are made of recyclable materials and after decommissioning the cabinet, it must be disposed of according to relevant regulations.
Certificate and conformity
This product is certified with EZÚ Czech.
Latest certificate is available at www.triton-racks.com/certificates. Product is fully in accordance with ČSN EN 62208 ed.2:2012 (EN 62208:2011).
Photogallery
