SNA - hybrid cabinet
Power distribution module of hybrid cabinets for home distribution systems. IP20 / IK06
Information
Power distribution module of hybrid cabinets for home distribution systems. IP20 / IK06.
Cable entries on the top, bottom and both sides of the cabinet allow its mounting into larger assemblies with other cabinets of this series including data cabinets. Cabinets are supplied in modular height, where one module occupies 166 mm. Data cabinets of this series are also included in these modules. The width and depth of the cabinet is uniform for all heights. The cabinet is universal for mounting on the wall or under the wall plaster. A cover frame is available for wall mounting. Thanks to the modularity of the cabinet, it is possible to use, for example, a data part with a height of 2 modules and 1 electro module, all covered by a modular frame with a height of 3 modules.
Removable door
The system of hinge mounting allows easy dismantling of the door.
Cover frame
When using the option of installation in the recess in the wall, cover frames are available for various size combinations.
Unique door design
The structure of the cabinet is designed for minimum installation depth.
Terminal block PE + N
The cabinet includes both terminal blocks for connecting PE and N conductors and a screw for connecting the bonding.
Mounting variability
Holes for mounting the right or left opening and mounting the cover frame are always prepared in the cabinet frame.
SNA – Flat door version cabinet
Slide lock
The plastic slide lock meets the requirement of easy opening of the power cabinet, does not protrude into the space in front of the cabinet and protects the cabinet against accidental opening.
Flat door
The -X2 version cabinet has a flat door, which is not protruding in front of the frame of the cabinet. The door can be easily configured to open on the opposite side, as well as completely disassembled for comfort installation.
DIN rails
Because of the flat door, DIN rails had to be positioned further inside the cabinet, so that seamless function of the installed devices was maintained.
The terminal PE + N was also maintained and the space under the DIN rails still allows comfortable connecting of the conductors.
- IP20 / IK06.
- Cabinet is hung directly on the wall or can be installed in a prepared recess in the wall.
- Cabinet is designed for individual assembly or with cabinet RNA.
- Multigate (cable openings) on the top, bottom and both side panels of the cabinet alow joinning the cabinet into the larger sets with other cabinets of this series including an data cabinets RNA type.
- Cabinet construction:
– welded frame from 1 mm thick sheet steel.
– steel door of 1 mm thickness. - The frame of the cabinet and all removable parts (side and rear covers, doors…) are bonded with patch cables that have to be properly fixed and inserted into connectors throughout the period of use of the cabinet.
- There is one M8 screw placed on the bottom part of the cabinet to connect the bonding.
- Cable openings covered with breakout-type blanking panels are placed in the top and the bottom of the cabinets, as well as on the sides.
- Maximum permissible load – cabinet: 20 kg; door: 2 kg.
Operating conditions
- Operating environment:
– houses, private residences,
– cabinets are not intended for outdoor installation or installation in environments which could adversely affect the functionality of the cabinet and the equipment installed in it (such as an environment where there is a danger of explosions or a damp or humid environment). - Must be protected against:
– physical damage,
– improper handling,
– other uses than the one it was intended for. - Improper handling means primarily:
– overloading (exceeding the maximum recommended load),
– installing equipment which could adversely affect the operation and functionality of the cabinet or other installed devices,
– interference with the construction or design of the cabinet.
Installation of the cabinet
This type of cabinet hangs directly on the wall, held in place by screws, anchors and washers. Can be also installed in a prepared recess in a wall using standard construction methods. To ensure the maximum recommended loading capacity, it is necessary to fix the cabinet securely to a wall of corresponding capacity (brick, concrete or similar) and to install all equipment inside in such a way as to evenly spread out the weight of the equipment.
Environmental protection
All parts are made of recyclable materials and after decommissioning the cabinet, it must be disposed of according to relevant regulations.
Certificate and conformity
This product is certified with EZÚ Czech.
Latest certificate is available at www.triton-racks.com/certificates. Product is fully in accordance with ČSN EN 62208 ed.2:2012 (EN 62208:2011).
Photogallery
